Blue M 146 Series Clean Room Mechanical Convection Oven

The Blue M Clean Room Mechanical Convection Oven is designed for a number of laboratory and industrial oven applications, including curing polyamide coatings, moisture drying, baking photo-resist coating and various pharmaceutical processes. 

Benefits of the Blue M 146 Series Clean Room Mechanical Convection Oven

• High quality design and simple operation
• Interior welded vapor tight
• Welded and sealed liner for an impervious barrier between the process chamber and the insulation material
• Horizontal air flow assures uniform thermal performance under all loading conditions
• Differential Air Pressure Switches alert you if loss of pressure or airflow is detected
• Multiple model options for custom test needs
• Quick access for simple inner chamber cleaning
• Easy to use controller

Features

• Heavy gauge steel exterior and stainless steel interior
• All exterior panels are at least 16 gauge
• Fiberglass insulation - 4 full inches minimizes heat loss
• Baked-on powder coated white enamel finish for long-lasting corrosion protection
• Blue M silicone door seal design for positive sealing of door
• Removable one-piece stainless steel interior features reinforced 304 stainless steel
• All welded and sealed construction assures continuously low particle counts
• Chamber vent port for exhausting of process by-products
• Suitable for inert gas purge to eliminate moisture and vent out contaminants. Adjustable inert gas glow meter
• Safety air flow switch
• Exclusive Blue M Re-circulating HEPA Filtered Air Delivery System
  • Easily removable HEPA filter
  • All re-circulated air is continuously re-filtered; no use of cleanroom air
  • Hermetically sealed from the environment to eliminate risk of infilration contamination

Performance

• NFPA 86 Class B oven
• Temperature range: 15°C above ambient to 250°C (482°F)
• Uniformity: +/-2% of setpoint
• Control Accuracy: +0.5°C
• Resolution: +0.1°C
• Performance data (typical): Run-up to 250°C 60 minutes or less

Warranty

Blue M warrants that from the date it ships and, if applicable, installs a product, or finishes performing a service, the product Blue M manufactured shall conform to written specifications that Blue M approved, and the product shall be free from defects in material and workmanship for twenty-four (24) months (with the exceptions of the Ultra Temp and LO/GO series, which have a 12 month warranty). Blue M further warrants that any service it performs shall conform to written specifications that Blue M approved and be free from defects in workmanship for twenty-four (24) months (with the exceptions of the Ultra Temp series, which are covered for 12 months. No service warranty for LO/GO series). If a purchaser purchases a TPS Preventive Maintenance & Calibration plan at the end of the warranty period, these limited warranties shall each be extended by twelve (12) months (with the exceptions of the LO/GO series) , subject to the exclusions below. If, within that time period, the original purchaser notifies Blue M in writing of an alleged non-conformity, and Blue M determines, to its reasonable satisfaction, that a product or service is, in fact, non-conforming, then Blue M shall, at its option and expense, repair or replace the non-conforming product or correct the non-conforming service, either at the original purchaser’s or Blue M’s factory. Click here for additional warranty details.