Blue M ESP 400 Series Mechanical Convection Oven

This small, cost-effective industrial oven provides reliable performance with
horizontal air flow which offers excellent temperature uniformity, and is an ideal
selection for applications where there are multiple tiers of product arranged to allow
air to flow horizontally from side-to-side. This economy oven features Blue M's onepass
air flow system which allows incoming air to pass over the heaters and through
the work chamber only once, if desired, enabling fast cool down or quickly venting
non-hazardous fumes.

Benefits of the Blue M ESP 400 Series Mechanical Convection Oven

• Horizontal airflow is ideal for thermal constancy and fast run-up and cool down rates
• Quick, quality product results are enabled by the One-Pass Airflow System
• LED display makes it easy to read setpoint and process variables
• Alert system protects overheating from occurring and automatically disconnects heater

Oven Features

• RKC RF100 Temperature Controller
  
• Centrifugal blower wheel
  
• Adjustable air intake and exhaust dampers
  
• Adjustable shelves - nickel-plated wire type with 7 shelf positions
  
• Fiberglass insulation to ensure safe cabinet skin temperature
  
• Heavy-duty door - double-wall, insulated construction
  
• Corrosion resistant, stainless steel (type 304) interior
  
• All-welded, heavy-duty exterior with heavy-gauge, reinforced cold-rolled steel
  
• Baked on white powder-coated enamel finish on exterior
  
• Every oven is fully assembled and individually factory tested
  
• Circuit breaker provided for ground fault protection as standard
  
• Easy to read digital LCD display
  
• Enhanced PID control
  
• Single set point
  
• Autotuning algorithm to calculate optimum set points and ramps
  
• Helps eliminate over and under shoot of temperature
  
• Overtemperature protection standard using CB100L or CB900L FM-approved controller with independent sensor and power

General Mechanical Convection Industrial Oven Specifications

• Temperature range: 15°C above ambient to 260°C (500°F)
• Uniformity: ±1% of setpoint
• Resolution: ±0.1°C
• Workspace capacity: 2.8 cubic feet
• Run-up time to 260°C:
  • 20 Minutes at 240 VAC
  • 30 Minutes at 208 VAC
  • 60 Minutes at 120 VAC
• Uniformity: Blue M can provide varying levels of uniformity; if you have a specific tolerance or specification which must be met, please contact us with yourrequirements so we can ensure the equipment is designed, tested, and adjusted to meet those requirements

Available Oven Options

• Nickel-plated wire rod shelves
  
• Glass observation panel
  
• Floorstand
  
• Circular chart recorder
  
• Ability to stack two units vertically (stacking frame)
  
• Eagle Signal Model B856 Digital Process Timer
  
• 24 Hour / 7 Day Digital Timer - Grasslin FM1D
  
• Chart Recorder
  
• Alternate Temperature Controller - Partlow 1166 & 1160
  
• Alternate Overtemperature Protection-Partlow 1161+ High Limit Controller

Warranty

Blue M warrants the equipment will be free from defects in material and workmanship for a period of two (2) years from the date of shipment (or from the installation date if this service is provided by TPS or a TPS approved partner and the date is approved by TPS). If a TPS Preventive Maintenance Plan is purchased before the end of the standard warranty period, these limited warranties shall be extended by one (1) additional year. If within the warranty period the original purchaser notifies Blue M in writing of an alleged non-conformity, and Blue M determines to its reasonable satisfaction that the product or service is in fact non-conforming, then Blue M shall, at its option and expense, repair or replace the non-conforming product or correct the non-conforming service, either at the original purchaser’s facility, or Blue M’s. Labor is only included for domestically installed units. Equipment installed outside of the United States (USA) will be one year parts only from date of shipment. For full details, exclusions, and other information on our warranty please go to: /support/blue-m