Blue M Friction-Aire® Safety Oven

Blue M Friction Aire® ovens provide a controlled heat source without heating elements, which eliminates atmospheric explosions and ignitions when working with hazardous Class 1, Group D materials. Class 1 atmospheres contain flammable vapors, and Group D materials include many solvents commonly used in finishing applications, such as lacquers and paints.

Benefits of the Blue M Friction-Aire® Safety Oven

• Controlled heat source eliminates atmospheric explosions and ignitions when working with Class 1, Group D materials
• Ideally suited for testing and processing of hazardous materials, paints, solvents, and lacquers.
• Maximum temperature uniformity
• Natural temperature interlock and built-in overtemperature protection provides added safety to users and product
• Economical design that endures years of use

Features

• High velocity airflow system generates heat
• Blower creates air turbulence and friction for even heat
• Temperature-sensitive bellows regulates ambient air
• By-pass damper
• By-pass chamber

Typical Performance

(Only data differing from typical models is noted under additional models)

• Models HS-1002, HS-1202, and HS-3802 (Typical)

  • Temperature Range: 20°C above ambient to 150°C (302°F)
  • Uniformity at +100°C: 0.5°C
  • Run up time to +150°C: 120 minutes
  • Cool down time to +50°C: 30 minutes depending on ambient temperature
  • Control accuracy: 0.5°C
  • Drift: at +50°C: 1.0°C
    • at +100°C: 0.75°C
    • at +150°C: 0.50°C
  • Maximum Velocity: 400 / FPM
  • Minimum Velocity: 100 / FPM
  • UL listed

• Model HS-362

  • Uniformity at +150°C: 1.0°C
  • Run up time to +150°C: 60 minutes
  • Cool down time to +50°C: 30 minutes depending on ambient temperature
  • Not UL listed
  • Maximum Velocity: 500 / FPM
  • Minimum Velocity: 200 / FPM

• Models HS-1004, HS-1204, and HS-3804

  • Temperature range: +20°C above ambient to +260°C (500°F)
  • Uniformity at +200°C: 1.0°C
  • Run up time to +260°C: 140 minutes
  • Cool down time to +50°C: 30 minutes depending on ambient temperature
  • Not UL listed
  • Drift: at +200°C: 0.50°C
  • Maximum Velocity: 500 / FPM
  • Minimum Velocity: 250 / FPM

Warranty

Blue M warrants that from the date it ships and, if applicable, installs a product, or finishes performing a service, the product Blue M manufactured shall conform to written specifications that Blue M approved, and the product shall be free from defects in material and workmanship for twenty-four (24) months (with the exceptions of the Ultra Temp and LO/GO series, which have a 12 month warranty). Blue M further warrants that any service it performs shall conform to written specifications that Blue M approved and be free from defects in workmanship for twenty-four (24) months (with the exceptions of the Ultra Temp series, which are covered for 12 months. No service warranty for LO/GO series). If a purchaser purchases a TPS Preventive Maintenance & Calibration plan at the end of the warranty period, these limited warranties shall each be extended by twelve (12) months (with the exceptions of the LO/GO series) , subject to the exclusions below. If, within that time period, the original purchaser notifies Blue M in writing of an alleged non-conformity, and Blue M determines, to its reasonable satisfaction, that a product or service is, in fact, non-conforming, then Blue M shall, at its option and expense, repair or replace the non-conforming product or correct the non-conforming service, either at the original purchaser’s or Blue M’s factory. Click here for additional warranty details.

Sales Sheet