Posted on November 27, 2018 in TPS
In the previous post, we introduced you to the spectrum of TPS brands, with a focus on Gruenberg and Blue M. In part II of this series, we’ll take a closer look at the remaining brands operating under Thermal Product Solutions, including the amazing back story of Tenney/Lunaire.
Read MorePosted on October 01, 2018 in TPS
Industry is founded on the idea of growth and expansion. Finding the right balance of the two is what drives success and progress throughout all industries. For most businesses, the path to success is filled with twists and turns as the company evolves over time and the TPS group is no exception.
Read MorePosted on September 14, 2018 in Blog
Changes in air pressure and other environmental fluctuations, such as changes in temperature and humidity, can affect the performance of electronics. Thermal vacuum testing simulates atmospheric conditions, including temperature and altitude, at high altitudes and in space.
Read MorePosted on August 01, 2018 in Blog
Product failure can be catastrophic, especially in circumstances when lives are at stake. Transportation at high altitudes can alter the pressure of sealed products, and this pressure changes significantly with every flight. These pressure changes can damage gaskets, potentially exposing parts to humidity and contaminants that can alter performance.
Read MorePosted on July 13, 2018 in Blog
Altitude testing demonstrates a product’s ability to survive air transport or show that the product can remain a functional piece of an aircraft’s overall assembly. Components used in aircraft and aerospace equipment must be able to withstand extreme cold temperatures while at altitude, but they must also be able to endure the rapid temperature changes equipment undergoes during takeoff and landing.
Read MorePosted on June 15, 2018 in Blog
Aircraft and space vehicles, such as satellites and rockets, endure extreme conditions while in flight. These extreme conditions can cause failure in critical components, which can have catastrophic results.
Read MorePosted on May 23, 2018 in Blog
In Part-1, we went over the importance of conducting environmental tests for electronic products. The reason that you can keep the same hair dryer for five years, the same TV for ten years, and the same car for fifteen years is due to product testing, most of which can be done in a TPS Environmental Test Chamber.
Read MorePosted on April 25, 2018 in Blog
In Part-1 of our two-part blog series, Environmental Testing: Improving the Life Span of Electronics, we will go over the various ways your everyday electronic devices, such as the television, computer, and tablets, are tested.
Read MorePosted on March 16, 2018 in Blog
Testing is an essential part of developing a quality product. It helps manufacturers create products that are reliable within certain technical standards. In other words, testing is a necessary step for product development teams to go through to provide high quality products that last.
Read MorePosted on February 13, 2018 in Blog
As a continuation to our blog last month we would like to discuss how thermal processing plays an important role in the production of pills. This is particularly true during the granulation process. Prior to pill formation, the granules need to be thoroughly dried and to accelerate the process manufacturers utilize heat.
Read MorePosted on January 25, 2018 in Blog
2018 promises to be a great year at Thermal Product Solutions (TPS). Our industrial and laboratory furnaces and ovens, and environmental temperature and stability test chambers are used for a multitude of applications in almost every industry. From the thermal processing of components to the testing of products before they hit the market, our equipment plays a large role in bringing you those everyday items that add quality, comfort, and convenience to your life.
Read MorePosted on December 20, 2017 in Blog
As the year comes to a close we would like to highlight a few of our business accomplishments and community involvement of 2017. Our Thermal Product Solutions (TPS) family is pleased to say that 2017 has been a successful year for all our brands.
Read MorePosted on November 28, 2017 in Blog
Pills have been around since about 1500 BCE, when ancient physicians would mix medicinal plant powders and spices with bread dough, honey or grease, and then form the mixture into little balls to make the medicine easier to take.
Read MorePosted on October 31, 2017 in Blog
As a continuation of our series focused on the dining experience and the role thermal processing plays in our daily lives, we bring you Part Two. In this blog post, you'll learn how the use of heat goes far beyond cutlery.
Read MorePosted on September 19, 2017 in Blog
One of the things everyone does to survive is eat. Whether you are drinking your morning coffee or are out for a five-star meal, cutlery is something that everyone uses. Continuing with our series of how heat treating plays a role in our everyday lives, we will focus this blog on the dining experience.
Read MorePosted on July 26, 2017 in Blog
The public sector is no longer leading the charge into the final frontier. Over the past few years, hundreds of startup companies have innovated everything from a lunar delivery service to an edge-of-space hot-air-balloon pleasure flight. We are incorporating video game technology into the normalization of satellite navigation. Within the next 20 years, every student could have his or her own personal search satellite. Connecting the limitless opportunities of space to our everyday lives is here. Some of the most exciting innovations in our space industry are yet to come.
Read MorePosted on June 26, 2017 in Blog
Testing can help the packaging industry avoid costly financial, environmental, and brand reputation penalties associated with packaging. Package testing ensures that packaging can stand up to vibrations and the extreme variances in temperature and humidity associated with shipping.
Read MorePosted on May 17, 2017 in Blog
Packaging material is essential for shipping products around the world. Preventing damage is one of the primary functions of packaging. Packages must be durable enough to withstand complex and sometimes rough-and-tumble shipping that can damage expensive or fragile cargo.
Read MorePosted on April 11, 2017 in TPS
A number of publicly and privately funded research spaces, known as incubators, have sprung up in the last five years. While each of these incubators are basically the same in that they provide scientists with the resources they need to take research from bench to bedside, each incubator is unique.
Read MorePosted on March 16, 2017 in Blog
There is a long and winding road between academic discovery and a drug’s entry into the pharmaceutical pipeline. Transforming research into viable compounds that pharma companies would fund and bring to market is challenging. Academic scientists come up with innovative ideas, but struggle to capture the attention of pharma companies. Biotechs have brought many more drugs to market, but just as many good medicines have yet to reach patients because the scientists lack the business expertise required to run a company.
Read MorePosted on February 10, 2017 in Blog
Uses for biopharmaceuticals include the manufacture of vaccines, blood and blood components, allergenics that treat allergies, body cells and tissues, living cells used in cell therapies, gene therapies, and recombinant therapeutic proteins.
Read MorePosted on January 27, 2017 in Blog
This year, we will be exploring a variety of industries that our products reach. No matter where you go, you are never too far from something that was processed, cured, or sterilized in our equipment. This two-part blog will be focused on the Bio-Pharma industry and why it is important.
Read MorePosted on December 27, 2016 in Blog
As 2016 draws to a close, we look back on the year and celebrate some of the changes and accomplishments that will help us serve you, our customers, better than ever before.
Read MorePosted on October 31, 2016 in Gruenberg
Gruenberg, a division of Thermal Product Solutions, LLC (TPS), will exhibiting at the American Association for Laboratory Animal Science's annual national meeting from October 30th - November 3rd, 2016.
Read MorePosted on October 17, 2016 in Blog
The Automotive Testing Expo, now in its thirteenth year, will take place October 25th - 27th, 2016 at the Suburban Collection Showplace in Novi, Michigan.
Read MorePosted on September 23, 2016 in Blog
For most of us, our days start off with the beeping of an alarm, maybe even hitting the snooze button a few times.
Read MorePosted on August 15, 2016 in Blog
Over the years, contact lenses have seen many upgrades and improvements. From the materials that are used to the way they are made, the quality and comfort has continued to improve.
Read MorePosted on July 27, 2016 in Blog
When we think of America in July, we think of fireworks, picnics and movies in the park. Something else that should be added to that list as we celebrate America’s rich history is manufacturing.
Read MorePosted on July 06, 2016 in Blog
Committed to innovation and robust designs, Tenney boasts one of the most comprehensive lines of environmental-testing chambers and rooms in the industry, however the company didn't start out that way.
Read MorePosted on May 23, 2016 in Blog
Thermal Product Solutions (TPS) is excited to attend the TurnKey Conference 2016 from May 24-25 at beautiful Gaylord National Harbor Resort centrally located in Oxon Hill, Maryland.
Read MorePosted on May 09, 2016 in Blog
Harold L. Lunick started “The Lunaire Group” in 1979 with the goal to create a company that would provide steady employment and continuing growth despite any changes in the economy.
Read MorePosted on April 15, 2016 in Blog
Between 1990 and 2010, greenhouse gas emissions increased from 34,000 million metric tons to over 45,000 million metric tons.
Read MorePosted on March 21, 2016 in Blog
TPS offers a unique and exciting opportunity for interns to get paid to learn new skills that they can then use on the job in the future.
Read MorePosted on February 26, 2016 in TPS
TPS has expanded its manufacturing capabilities to the west coast so we can better serve our customer base located in the surrounding areas.
Read MorePosted on January 22, 2016 in Blog
To say that automotive, electronics, aerospace and defense components need to be tested as thoroughly as possible before they reach the end user is something of an understatement.
Read MorePosted on December 15, 2015 in TPS
Throughout the year, it is important to give back to the local communities we live and work in.
Read MorePosted on August 26, 2015 in Green Technologies
Industry has recently seen a demand for greener technologies that require less energy, less water, and less maintenance. This puts the pressure on equipment engineers to develop innovative ways to approach sterilization.
Read MorePosted on July 07, 2015 in TPS
Does that thought of being involved in the next big medical technology break through excite you?
Read MorePosted on June 11, 2015 in Choosing Your Industrial Oven
Industrial ovens are available in an array of capabilities, considerations, classifications, and configurations to meet a wide range of thermal-processing applications and accommodate almost any work space footprint.
Read MorePosted on June 03, 2015 in Safety
At TPS, the safety of our employees and customers is our top priority.
Read MorePosted on May 21, 2015 in Continuous Improvements
At TPS we are always looking for ways to do things better.
Read MorePosted on May 12, 2015 in Gruenberg
Thermal Product Solutions’ new Gruenberg Silver Select Panelized Class A Truck In Oven will blow you away . . .
Read More
