Excess Inventory and Refurbished Chambers List

Gruenberg Conveyor Oven TPS 150°C Conveyor Oven - In Stock

Gruenberg Conveyor Oven Serial# - 27469

RARE FIND!-Gruenberg 22" x 11.5" Conveyor Oven             

Available for Short Delivery

Features:

  • Single heating zone and a maximum operating temperature of 150 Deg C.
  • 18" wide belt with 1" x 1" flat wire mesh belt
  • Variable speed drive with speed range of 2"-24" per minute.
  • Oven is provided with a 3 phase disconnect.
  • The Oven is constructed with a cold rolled steel exterior surface and 304 Stainless Steel Interior.


Purchase Price: $ 18,200.00

Blue M OV-18C Vacuum Oven TPS Temperature Range: 20°C above ambient to 260°C Max
In Stock - Can Ship in 2-3 Days

Blue M OV-18C Vacuum Oven Serial# - V-214

Blue M Vacuum Oven Available for Rent or Purchase.

Can ship in 2-3 days! 

Features

  • Full 304 Stainless Steel interior
  • 3" of fiberglass Insulation
  • Fully Programmable and Profile Capable Controller
  • Independent High Limit
  • Integrated Vacuum Pump
  • Analog Vacuum Gauge
Purchase Price: $ 4,200.00
Rental Price: $ 550.00/Month

Tenney T21RC-3 Temperature & Humidity Chamber - Water Cooled TPS Temperature: -70°C to +200°C
In Stock

Tenney T21RC-3 Temperature & Humidity Chamber - Water Cooled Serial# - 29062

RARE FIND!!!

5°C/minute Temperature- Humidity Chamber.  Refurbished Unit Available for Rent or Purchase. Can ship in 2-3 days!

Our line of Tenney Series chambers employ leading edge technology to supply our customers with the most efficient and environmentally friendly test equipment possible. State-of-the art
controllers allow precise, effective monitoring and programming of your unit. An exact blend of
insulations ensure efficient chamber operation and maximize floor space by minimizing equipment footprints. Time-proven mechanical refrigeration, in single or cascade systems, allow years of worry-free use. And, environmentally safe CFC-free refrigerants provide the safety you demand.

Benefits

  • Structural reinforcement is used at all critical points
  • Through wall ports are continuously welded
  • Fully welded liner

Features

  • Profiling Control System with datalogging
  • Casters (2 locking)
  • Numerous options included
Purchase Price: $29,500.00
Rental Price: $1,950.00 / month

Tenney TJR Temperature Test Chamber TPS Temperature Range: -68°C to 180°C
Can ship in 2-3 Days

Tenney TJR Temperature Test Chamber Serial# - TBD

New - In-Stock & Ready to Ship! Available for Rent or Purchase.

Can Ship in 3-5 Days!

The Tenney Junior temperature test chambers have been in the market for over 50 years. They are well suited for use in electronic, military, and pharmaceutical quality assurance and reliability testing, along with research testing and production processes. In keeping with the needs of today's lab, we specifically designed these bench top and floor chambers to have a compact exterior yet an ample interior work space to maximize valuable floor space. 

Benefits

  • Space saving design - bench design
  • Compact exterior with ample interior work space to maximize valuable floor space
  • Wide range of temperature conditioning with a set of diverse optional conditioning equipment

Features

  • Vapor tight interior made with 100% stainless steel
  • Control tolerance of +/-0.3°C
  • Low-mass nichrome, open wire heating system
  • Vertical-down recirculating system
Purchase Price: $8,375.00
Rental Price: $650.00 / month

Click Here to see the product page.

Tenney TJR Temperature Test Chamber TPS Can Ship in 3-5 Days!
Temperature Range: -73C - 200C

Tenney TJR Temperature Test Chamber Serial# - TBD

New and In Stock! Available for Rent or Purchase.

The Tenney Junior temperature test chambers have been in the market for over 50 years. They are well suited for use in electronic, military, and pharmaceutical quality assurance and reliability testing, as well as research testing and production processes. In keeping with the needs of today’s lab, we specifically designed these bench top and floor chambers to have a compact exterior yet an ample interior work space to maximize valuable floor space. 

Benefits

  • Space saving bench design
  • Compact exterior with ample interior work space to maximize valuable floor space
  • Wide range of temperature conditioning with a set of diverse optional conditioning equipment

Features

  • Vapor tight interior made with 100% stainless steel
  • Control tolerance of +/-0.3°C
  • Low-mass nichrome, open wire heating system
  • Vertical-down recirculating system
Purchase Price: $7,533.00
Rental Price: $600.00 / month

Click Here to see the product page.

Tenney TJR Temperature Test Chamber TPS Temperature Range: -68°C to 180°C
Ships in 2-3 Days

Tenney TJR Temperature Test Chamber Serial# - 139218

Returned Unit - In-Stock & Ready to Ship!

Includes:  Dry Air Purge, TempGard, Data Logging & Chart Trending

Available for Rent or Purchase. Can Ship in 2-3 Days!

The Tenney Junior temperature test chambers have been in the market for over 50 years. They are well suited for use in electronic, military, and pharmaceutical quality assurance and reliability testing, along with research testing and production processes. In keeping with the needs of today's lab, we specifically designed these bench top and floor chambers to have a compact exterior yet an ample interior work space to maximize valuable floor space. 

Benefits

  • Space saving design - bench design
  • Compact exterior with ample interior work space to maximize valuable floor space
  • Wide range of temperature conditioning with a set of diverse optional conditioning equipment

Features

  • Vapor tight interior made with 100% stainless steel
  • Control tolerance of +/-0.3°C
  • Low-mass nichrome, open wire heating system
  • Vertical-down recirculating system
  • EIA-232 / RS485 Interface
Purchase Price: $9,377.00
Rental Price: $650.00 / month

Click Here to see the product page.

Tenney T2C Temperature Test Chamber TPS Temperature Range: -68°C to 180°C
1 In Stock

Tenney T2C Temperature Test Chamber Serial# - 141537-02

New & Back In Stock.  Can Ship in 2-3 Days!

Benefits

  • Easy to use controller
  • Fiberglass and polyurethane around chamber for uniform insulation
  • Minimal thermal transfer for more accurate results
  • Accurate control and display with minimum maintenance
  • Units are mobile
  • The Tenney T2 Temperature Test Chamber has a minimum footprint

Features

  • Vapor-tight, continuously welded stainless steel interiors
  • Low work space height to ease the loading and unloading of product
  • Vertical re-circulation conditioning system
  • Ethernet data communications with data logging
  • Platinum Resistance Temperature Detector (RTD)
  • Cascade refrigeration system
  • Built in safety devices
Purchase Price: $10,899.00
Rental Price: $750.00 / month

Click Here to see the product page.

Tenney T2C Temperature Test Chamber TPS 1 In Stock
Ships in 2-3 days

Tenney T2C Temperature Test Chamber Serial# - 140583-01

Short term rental unit In Stock!  Available for rent or purchase. 

Benefits

  • Easy to use controller
  • Fiberglass and polyurethane around chamber for uniform insulation
  • Minimal thermal transfer for more accurate results
  • Accurate control and display with minimum maintenance
  • Units are mobile
  • The Tenney T2 Temperature Test Chamber has a minimum footprint

Features

  • Vapor-tight, continuously welded stainless steel interiors
  • Low workspace height to ease the loading and unloading of product
  • Vertical recirculation conditioning system
  • Ethernet data communications with datalogging
  • Platinum Resistance Temperature Detector (RTD)
  • Cascade refrigeration system
  • Built in safety devices
Purchase Price: $ 10,200.00
Rental Price: $750.00 / month

Click Here to see the product page.

T2RC Temperature & Humidity Cycling Test Chamber TPS 2 In Stock
Ships in 1-3 Days

T2RC Temperature & Humidity Cycling Test Chamber Serial# - 140585, 141538

New Units Back in Stock.  Can Ship in 2-3 Days!  Available for Purchase or Rent.

Benefits

  • Easy to use controller
  • Fiberglass and polyurethane around chamber for uniform insulation
  • Minimal thermal transfer for more accurate results
  • Accurate control and display with minimum maintenance
  • Units are mobile
  • The Tenney T2 Temperature / Humidity Cycling Test Chamber has a minimum footprint

Features

  • Vapor-tight, continuously welded stainless steel interiors
  • Low work space height to ease the loading and unloading of product
  • Vertical re-circulation conditioning system
  • EIA-232 and EIA-485 data communications with Modbus RTU protocol
  • Platinum Resistance Temperature Detector (RTD)
  • Electronic capacitive humidity sensor
  • Cascade refrigeration system
  • Built in safety devices
Purchase Price: $19,442.00
Rental Price: $1,250.00 / month

Click Here to see the product page.

Tenney T2RC Temperature & Humidity Cycling Test Chamber TPS Temperature Range -68 to 180 C
Can Ship in 2-3 Days!

Tenney T2RC Temperature & Humidity Cycling Test Chamber Serial# - 138220

Short Term Rental Unit.  Now In-Stock! Available for Rent or Purchase! Can Ship in 2-3 Days!

The Tenney T2 temperature and humidity cycling chamber simulates a wide range of temperature and humidity conditions while utilizing minimal floor space. We specifically designed these environmental chambers to have a compact exterior and an ample interior work space. 

The T2 Temperature and Humidity Cycling Chamber design allocates space within the interior of the cabinet for all standard options. This greatly improves the mobility of the unit as well as the overall appearance. 

Benefits

  • Easy to use controller
  • Fiberglass and polyurethane around chamber for uniform insulation
  • Minimal thermal transfer for more accurate results
  • Accurate control and display with minimum maintenance
  • Units are mobile
  • The Tenney T2 Temperature / Humidity Cycling Test Chamber has a minimum footprint

Features

  • Vapor-tight, continuously welded stainless steel interiors
  • Low work space height to ease the loading and unloading of product
  • Vertical re-circulation conditioning system
  • Ethernet data communications
  • Platinum Resistance Temperature Detector (RTD)
  • Electronic capacitive humidity sensor
  • Cascade refrigeration system
  • Built in safety devices
Purchase Price: $16,832.00
Rental Price: $1,250.00 / month

Click Here to see the product page.

Tenney UTC-F4T-C Temperature Test Chamber TPS In Stock
Ships in 2-3 Days

Tenney UTC-F4T-C Temperature Test Chamber Serial# - 135313

Short Term Rental Unit. Available to ship in 2-3 days.

Tenney's Benchmaster temperature and humidity test chambers are capable of simulating a wide range of temperature or temperature and humidity conditions. The five-cubic foot work space will accept equipment as large as a 19" relay rack. These humidity test chambers are designed with a compact exterior that maximizes the interior work space. 

Benefits

  • Simulates a wide range of temperature or combined temperature and humidity conditions to meet a variety of testing needs
  • Compact design maximizes interior laboratory works pace
  • Vertical-down airflow assures consistent conditions

Features

  • Vapor-tight interior liners of 100% continuously welded stainless steel
  • Humidity capable models constructed of 100% non-corroding parts and have a low-water protection system
  • Open-air low mass nichrome wire heating elements
  • Cascade refrigeration system with hermetic compressor
  • 100 Ohm Platinum RTD sensor for temperature measurement
  • Chamber drain connection
  • Propeller fan for airflow
Purchase Price: $ 13,900.00
Rental Price: $ 1050.00 / month

Tenney Benchmaster BTC Temperature Test Chamber TPS Temperature: -70C to +200C
In Stock

Tenney Benchmaster BTC Temperature Test Chamber Serial# - 27009-05

Fully Refurbished BTC.  Available for Rent or Purchase.  Can Ship in 1-2 Days! 

Benefits

  • All features of large chamber in a benchtop design
  • Workspace of five cubic feet
  • Suited for electronic, military, and pharmaceutical quality assurance and reliability testing as well as research testing and production processes

Features

  • Cascade condensor
  • Vertical down airflow 
  • Compact Design
Purchase Price: $10,600.00
Rental Price: $950.00 / month

Tenney Benchmaster BTRC-VIII-C Temperature / Humidity Test Chamber TPS Temperature: -73°C to 200°C
Can ship in 2 -3 Days

Tenney Benchmaster BTRC-VIII-C Temperature / Humidity Test Chamber Serial# - 29045 & 32650

2 Units Available- Fully Refurbished! Available for Rent or Purchase. Can ship in 3-5 Days!

Tenney's Benchmaster temperature and humidity test chambers are capable of simulating a wide range of temperature or temperature and humidity conditions. The five-cubic foot work space will readily accept equipment as large as a 19" relay rack. 

In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior work space.  

Benefits

  • Simulates a wide range of temperature or combined temperature and humidity conditions to meet a variety of testing needs
  • Compact design maximizes interior laboratory workspace
  • Vertical-down airflow assures consistent conditions

Features

  • Vapor-tight interior liners of 100% continuously welded stainless steel
  • Humidity capable models constructed of 100% non-corroding parts and have a low-water protection system
  • Open-air low mass nichrome wire heating elements
Purchase Price: $13,500.00
Rental Price: $1,150.00 / month

Click Here to see the product page.

Tenney Benchmaster BTRC-WF4T-C Temperature / Humidity Test Chamber TPS 1 in Stock
Ships in 2-3 Days

Tenney Benchmaster BTRC-WF4T-C Temperature / Humidity Test Chamber Serial# - 135770

In - Stock.  Available for Rent or Purchase.

Tenney's Benchmaster temperature and humidity test chambers are capable of simulating a wide range of temperature or temperature and humidity conditions. The five-cubic foot work space will readily accept equipment as large as a 19" relay rack. 

In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior work space. 

Benefits

  • Simulates a wide range of temperature or combined temperature and humidity conditions to meet a variety of testing needs
  • Compact design maximizes interior laboratory work space
  • Vertical-down airflow assures consistent conditions
  • Window in door with interior light

Features

  • Vapor-tight interior liners of 100% continuously welded stainless steel
  • Humidity capable models constructed of 100% non-corroding parts and have a low-water protection system
  • Open-air low mass nichrome wire heating elements
Purchase Price: $16,900.00
Rental Price: $1,325.00 / month

Click Here to see the product page.

TC30RC2.0-A-F4T-C Tenney TPS Temperature Range: -68°C to 180°C
ONE IN STOCK!

TC30RC2.0-A-F4T-C Tenney "TCseries" Temperature & Humidity Test Chamber Serial# - 139370

Rental Returned Unit Back In Stock!  Can ship in 2-3 Days!

The TC Series of environmental cycling reach-in test chambers include both temperature-only chambers and temperature / humidity chambers. The Tenney TC Series Cycling Test Chambers offer design features for optimal performance such as a high volume horizontal-down air circulation system with an electric heating system and a mechanical refrigeration system. If the humidity option is selected, a vapor injection type humidification system is used to condition the product. A wide range of options can be added to enhance the equipment. Since 1932, Tenney engineering continues to incorporate the latest technologies in heating, cooling, and humidification to meet the most stringent demands in the industry.

Benefits

  • Design features for optimal performance such as high volume horizontal down air circulation
  • Structural reinforcement is used at all critical points
  • Through wall ports are continuously welded
  • Electric heating system and mechanical refrigeration system
  • Wide range of options available

Features

  • Casters (2 locking)
  • Profiling Control System
  • Window in Door
  • Chamber light
Purchase Price: $26,900.00
Rental Price: $1,950.00 / month

Click Here to see the product page.

TC30RC2.0-A-F4T-C Tenney TPS In Stock - Can Ship in 2-3 Days
Temperature range: -68C to 180C

TC30RC2.0-A-F4T-C Tenney "TCseries" Temperature & Humidity Test Chamber Serial# - 141539

New Unit In Stock!  Available for Quick Shipment! 

The TC Series of environmental cycling reach-in test chambers include both temperature-only chambers and temperature / humidity chambers. The Tenney TC Series Cycling Test Chambers offer design features for optimal performance such as a high volume horizontal-down air circulation system with an electric heating system and a mechanical refrigeration system. If the humidity option is selected, a vapor injection type humidification system is used to condition the product. A wide range of options can be added to enhance the equipment. Since 1932, Tenney engineering continues to incorporate the latest technologies in heating, cooling, and humidification to meet the most stringent demands in the industry.

Benefits

  • Design features for optimal performance such as high volume horizontal down air circulation
  • Structural reinforcement is used at all critical points
  • Through wall ports are continuously welded
  • Electric heating system and mechanical refrigeration system
  • Wide range of options available

Features

  • Casters (2 locking)
  • Watlow F4T Profiling Control System
  • Ethernet Communications
  • Window in Door
  • Chamber light
  • UL508A Control Panel
Purchase Price: $30,059.00
Rental Price: $1,950.00 / month

Click Here to see the product page.

Tenney T40C-10.0 TPS -70C - +200C ONLY 1 In Stock!
Ready to ship in 5-7 Days

Tenney T40C-10.0 "Classic" Test Chamber Serial# - 51983

RARE FIND!!! 

One-of-a-kind, fully refurbished Tenney T40C Environmental Test Chamber.  Large capacity with a modest footprint.  Ready for purchase or rental!

Our line of Tenney Series chambers employ leading edge technology to supply our customers with the most efficient and environmentally friendly test equipment possible.  State-of-the-art controllers allow precise, effective monitoring and programming of your unit.  An exact blend of insulation ensure efficient chamber operation and maximize floor space by minimizing equipment footprints.  Time-proven mechanical refrigeration, in single or cascade systems allow years of worry-free use.  And environmentally safe CFC-free refrigerants provide the safety you demand.

Benefits

  • Structural reinforcement is used at all critical points
  • Through wall ports are continuously welded
  • Fully welded liner

Features

  • Design features for optimal performance such as high volume horizontal down air circulation
  • Electric heating system and mechanical refrigeration system
  • Profiling Touch Screen Control System
  • Casters (2 locking)
Purchase Price: $28,500.00
Rental Price: $3,500.00 / month

Espec EWPT - Large, High Ramp Temperature Chamber TPS In Stock - Can Ship in 2-3 Days
Recent Trade In unit

Espec EWPT - Large, High Ramp Temperature Chamber Serial# - 304191C

New Discounted Price

Up to 8°C/Minute Cooling Rate

Trade-In Unit - Refurbished and Ready for Shipment

Standard Features:

• Watlow F4T Touch-screen Controller with Data Logging
• (6) 3" (76mm) access ports on the left and right side walls and ceiling
• Large heated viewing window
• Single left-hand hinged door
• Heavy duty adjustable door latch
• Emergency stop push-button
• Water-cooled refrigeration system- Remote Air Cooled optional
• Power Requirements: 460VAC (+15%/-10%), three phase, 60Hz @ 100Amps
• Interior light

 

Purchase Price: $ 34,600.00
Rental Price: $2,800.00

Lunaire CEO-908-4-C-F4T Temperature & Humidity Steady State  Stability Test Chamber TPS Only 1 in Stock!
Can ship in 3-5 Days!

Lunaire CEO-908-4-C-F4T Temperature & Humidity Steady State Stability Test Chamber Serial# - 140591-02

New Unit.  Available for sale or rent.  Ready to ship! 

Lunaire’s steady-state chambers are available in four convenient sizes. With work space sizes of 8, 16, 32, and 58-cubic-feet and a variety of temperature and humidity combinations, these chambers provide the flexibility for a wide range of uses.

Benefits

  • Meets a variety of needs with availability in four sizes and multiple temperature and humidity combinations
  • Temperature/humidity settings are housed conveniently in one controller and allow for hands-free operation
  • Designed for quick shipping, easy installation, and consistency over controls, utility requirements, and heat output
  • Air intake and exhaust tubes with manual dampers vent undesirable process moisture and vapors, protecting the product
  • Highly efficient horizontal airflow system provides maximum temperature uniformity in testing
  • Safety-minded low limit and high limit temperature shutdown circuits sound, limiting unwanted results

Features

  • Electric Incoloy-sheathed tubular heaters
  • Single stage reciprocating type compressor with Non-CFC refrigerant
  • Vapor-Flo II Humidity Generator
  • Centrifugal type blower wheel with external mounted motor for air circulation
  • Door Gasket Trough and Chamber Drain
  • Non-ramping, manual mode
  • Direct printing to a serial printer
  • Direct connection to a PLC or computer workstation
  • High definition, LCD display with four digital input lines
  • Solid Shelves included
Purchase Price: $13,985.00
Rental Price: $1,250.00 / month

Click Here to see the product page.

Lunaire CEO-932-4-C-F4T Temperature & Humidity Steady State Stability Test Chamber TPS 1 In Stock
Can Ship in 2-3 Days

Lunaire CEO-932-4-C-F4T Temperature & Humidity Steady State Stability Test Chamber Serial# - 139691-01

Rental Returned Unit back in stock. Can ship in 2-3 Days! Available for Rent or Purchase.

Benefits

  • Temperature/humidity settings are housed conveniently in one controller and allow for hands-free operation
  • Designed for quick shipping, easy installation, and consistency over controls, utility requirements, and heat output
  • Air intake and exhaust tubes with manual dampers vent undesirable process moisture and vapors, protecting the product
  • Highly efficient horizontal airflow system provides maximum temperature uniformity in testing
  • Safety-minded low limit and high limit temperature shutdown circuits sound, limiting unwanted results

Features

  • Electric Incoloy-sheathed tubular heaters
  • Single stage reciprocating type compressor with Non-CFC refrigerant
  • Vapor-Flo Humidity Generator
  • Centrifugal type blower wheel with external mounted motor for air circulation
  • Door Gasket Trough and Chamber Drain
  • Non-ramping, manual mode
  • Direct printing to a serial printer
  • Direct connection to a PLC or computer workstation
  • High definition, LCD display with four digital input lines
  • Solid Shelves included
Purchase Price: $13,450.00
Rental Price: $1,450.00 / month

Click Here to see the product page.

Lunaire CEO-932-4-C-F4T Temperature & Humidity Steady State Stability Test Chamber TPS NOW IN STOCK!
Ready to Ship in 2-3 Days

Lunaire CEO-932-4-C-F4T Temperature & Humidity Steady State Stability Test Chamber Serial# - 140587-02, 141541-01, -02

New Units back in stock. Can ship in 2-3 Days! Available for Rent or Purchase.

Benefits

  • Temperature/humidity settings are housed conveniently in one controller and allow for hands-free operation
  • Designed for quick shipping, easy installation, and consistency over controls, utility requirements, and heat output
  • Air intake and exhaust tubes with manual dampers vent undesirable process moisture and vapors, protecting the product
  • Highly efficient horizontal airflow system provides maximum temperature uniformity in testing
  • Safety-minded low limit and high limit temperature shutdown circuits sound, limiting unwanted results

Features

  • Electric Incoloy-sheathed tubular heaters
  • Single stage reciprocating type compressor with Non-CFC refrigerant
  • Vapor-Flo Humidity Generator
  • Centrifugal type blower wheel with external mounted motor for air circulation
  • Door Gasket Trough and Chamber Drain
  • Non-ramping, manual mode
  • Direct printing to a serial printer
  • Direct connection to a PLC or computer workstation
  • High definition, LCD display with four digital input lines
  • Solid Shelves included
  • FG#: 738428A
Purchase Price: $15,961.00
Rental Price: $1,450.00 / month

Click Here to see the product page.

Blue M DCSA-256-F-SP Class A Mechanical Convection Oven TPS Temperature Range: 15°C above ambient to 350°C
Hurry, Only 2 Left!

Blue M DCSA-256-F-SP Class A Mechanical Convection Oven Serial# - 68066-05, -06

Last Two Available!  Contact the TPS Refurb Department for current lead times.

Benefits

  • NFPA recommended features reduce hazardous vapors and flammability
  • Welded construction prevents dangerous build up on chamber walls
  • Airflow switches stop heaters in event of airflow loss for added safety and assurance of quality production

Features

  • Housings made from reinforced, heavy gauged, cold rolled steel
  • Interiors made of Type 304 stainless steel
  • Welded construction
  • Fiberglass insulation
  • Silicone sealed steel door
  • Eternal cylindrical heater banks
  • Direct drive motor/ blower system
  • Forced exhaust system
  • Airflow switches
  • Adjustable purge/timer door switch
  • Blow-out relief panel and safety cage
  • Fire extinguishing port
  • Angle shelf supports
Purchase Price: $10,500.00

Blue M DC-296 Mechanical Convection Oven TPS 1 In Stock
Can Ship in 3-5 Days

Blue M DC-296 Mechanical Convection Oven Serial# - 137170

Cancelled Order. New! Available for Purchase or Rental.  Can ship in 3-5 Days! 

The Blue M Standard Mechanical Convection Oven is ideal for a number of laboratory and industrial oven applications, including ASTM testing, epoxy curing, moisture drying, UL testing, aging of electronic components and devices, and other processes and testing requirements. 

Benefits

  • Available with profiling or single setpoint temperature controls
  • Horizontal air flow assures uniform thermal performance under all loading conditions
  • Exclusive Blue M Eterna heating elements - the most reliable available, with heavy gauge, high temperature nickel chromium where, low-watt density for longer service life, standard air flow switch
  • Blue M one-pass air flow controls your profile, including cool down with infinitely variable control from full recirculation to full one pass, and optional motorized damper for automatic operation
  • Direct drive blower multi-blade centrifugal blower with high-volume air delivery, dynamically balanced

Features

  • Differential air pressure switches alert operators before costly problems with batch runs
  • Many different workspace sizes to fit virtually any requirement
  • Quick access for simple inner chamber cleaning
  • Easy to use controller for repeatable results and less training requirements
  • Reinforced Type 304 stainless steel interior resists corrosion and makes cleaning easy
  • 4 inches of fiberglass insulation saves energy and provide cool to the touch exterior
  • Adjustable air intake and exhaust dampers for flexible testing conditions
  • Infinitely variable control from full recirculation to full one pass to accommodate any processing need
  • Profiling or single setpoint temperature controls offer flexible recipe options
  • Standard air flow switch
Purchase Price: $9,257.00
Rental Price: $1150.00 / month

Click Here to see the product page.

Blue M DC-256-C-ST350 Mechanical Convection Oven TPS Temperature: 15ºC Above Ambient to 350ºC
Can Ship in 2-3 Days!

Blue M DC-256-C-ST350 Mechanical Convection Oven Serial# - DC-8811

Fully Refurbished Unit.  Ready for Shipment!  Ships in 2-3 days 

Benefits

  • Available with profiling or single set point temperature controls
  • Horizontal air flow assures uniform thermal performance under all loading conditions
  • Exclusive Blue M Eterna heating elements - the most reliable available, with heavy gauge, high temperature nickel chromium where, low-watt density for longer service life, standard air flow switch
  • Blue M one-pass air flow controls your profile, including cool down with infinitely variable control from full re-circulation to full one pass, and optional motorized damper for automatic operation
  • Direct drive blower multi-blade centrifugal blower with high-volume air delivery, dynamically balanced

    Features

    • Differential air pressure switches alert operators before costly problems with batch runs
    • Many different work space sizes to fit virtually any requirement
    • Quick access for simple inner chamber cleaning
    • Easy to use controller for repeatable results and less training requirements
    • Reinforced Type 304 stainless steel interior resists corrosion and makes cleaning easy
    • 4 inches of fiberglass insulation saves energy and provide cool to the touch exterior
    • Adjustable air intake and exhaust dampers for flexible testing conditions
    • Infinitely variable control from full re-circulation to full one pass to accommodate any processing need
    • Profiling or single set point temperature controls offer flexible recipe options
    • Standard air flow switch
    Purchase Price: $4,800.00
    Rental Price: $1,250.00 / month

    Click Here to see the product page.

    Blue M DC-256-C-F4T Mechanical Convection Oven TPS 15°C above ambient to 350°C
    Ships in 3-5 Days

    Blue M DC-256-C-F4T Mechanical Convection Oven Serial# - 138740-02

    New & In Stock! Available for Rent or Purchase.  Can Ship in 3-5 Days!

    The Blue M Standard Mechanical Convection Oven is ideal for a number of laboratory and industrial oven applications, including epoxy curing, moisture drying, UL testing, aging of electronic components and devices, and other processes and testing requirements.   

    Benefits
    • Horizontal air flow assures uniform thermal performance under all loading conditions
    • Exclusive Blue M Eternal heating elements - the most reliable available, with heavy gauge, high temperature nickel chromium where, low-watt density for longer service life, standard air flow switch
    • Blue M one-pass air flow controls your profile, including cool down with infinitely variable control from full re-circulation to full one pass, and optional motorized damper for automatic operation
    • Direct drive blower multi-blade centrifugal blower with high-volume air delivery, dynamically balanced
    Features
    • Differential air pressure switches alert operators before costly problems with batch runs
    • Quick access for simple inner chamber cleaning
    • Easy to use controller for repeatable results and less training requirements
    • Reinforced Type 304 stainless steel interior resists corrosion and makes cleaning easy
    • 4 inches of fiberglass insulation saves energy and provide cool to the touch exterior
    • Adjustable air intake and exhaust dampers for flexible testing conditions
    • Infinitely variable control from full re-circulation to full one pass to accommodate any processing need
    • Profiling or single set-point temperature controls offer flexible recipe options
    • Standard air flow switch
    Purchase Price: $10,123.00
    Rental Price: $1,450.00 / month

    Click Here to see the product page.

    Blue M HS-1202-F Friction-Aire Safety Oven TPS 1 In Stock
    Can ship in 2-3 Days

    Blue M HS-1202-F Friction-Aire Safety Oven Serial# - 29209

    Refurbished Unit, In-Stock and ready for shipment! 

    Benefits

    • Controlled heat source eliminates atmospheric explosions and ignitions when working with Class 1, Group D materials
    • Ideally suited for testing and processing of hazardous materials, paints, solvents, and lacquers.
    • Maximum temperature uniformity
    • Natural temperature interlock and built-in over temperature protection provides added safety to users and product
    • Economical design that endures years of use

    Features

    • High velocity airflow system generates heat
    • Blower creates air turbulence and friction for even heat
    • Temperature-sensitive bellows regulates ambient air
    • By-pass damper
    • By-pass chamber
    • Temperature range: +20°C above ambient to +150°C (302°F)
    • Run up time to +150°C: 120 minutes
    • Cool down time to +50°C: 30 minutes depending on ambient temperature
    • Drift: at +150°C: 0.50°C
    • Maximum Velocity: 400 / FPM
    • Minimum Velocity: 100 / FPM
    Purchase Price: $19,760.00
    Rental Price: $2,500.00

    Click Here to see the product page.

    ESP-400 Blue M Mechanical Convection Oven TPS Two In Stock!!!
    Can Ship in 2-3 Days

    ESP-400 Blue M Mechanical Convection Oven Serial# - 139793-01, 139793-02

    NEW Units Now in Stock & Ready to Ship!

    The Blue M ESP-400 Mechanical Convection Horizontal Air flow Oven provides reliable performance, making it ideal for constant temperature work and for applications where fast run-up and cool-down rates are required. 

    Benefits of the Blue M ESP 400 Series Mechanical Convection Oven

    • Horizontal airflow is ideal for thermal constancy and fast run-up and cool down rates
    • Quick, quality product results are enabled by the One-Pass Airflow System
    • LED display makes it easy to read set point and process variables
    • Alert system protects overheating from occurring and automatically disconnects heater

    Features

    • Open-air nichrome wire heater elements
    • Centrifugal blower wheel
    • Adjustable air intake and exhaust dampers
    • Stainless steel interior corrosion resistant, - including inner face of door.
    • Adjustable shelves - nickel-plated wire type with 7 shelf positions.
    • Baked on powder-coated enamel finish for long-lasting corrosion protection.
    • Fiberglass insulation to ensure moderate cabinet skin temperature.
    • Heavy-duty door - double-wall, insulated construction.
    • Profiling or single set point temperature controls
    Purchase Price: $5,209.00

    Click Here to see the product page.

    Blue M LO-90-E Lab Oven TPS Ambient +10°C to +260°C
    Ships in 2-3 Days

    Blue M LO-90-E Lab Oven Serial# - E1804113

    Customer Returned Unit - In-Stock & Ready to Ship!

    The Blue M Lab Oven features horizontal air flow that allows for tighter temperature uniformity. It also offers adjustable over-temperature protection to prevent damage to the oven or its load.  

    Benefits

    • Long-lasting, tube-style heating elements with superior heat ramp-up and recovery times
    • High quality design for maximum temperature uniformity
    • Efficient and environmentally friendly operation
    • Independent and adjustable over-temperature protection against load and oven damage

    Features

    • Ergonomic handles and controls
    • Stainless steel interior
    • Powder coated steel exterior
    • Tube-style heating elements
    • Extra thick insulation
    • Horizontal airflow design
    • Adjustable shelving and 2 perforated shelves for airflow
    NOTE: These lab ovens cannot be used with any volatile or hazardous materials
    Purchase Price: $2,385.00

    Click Here to see the product page.

    Gruenberg 1200°F Truck Oven- T120H150.0-G Serial# - 115693

     1200°F Truck Oven, Immediate Availability

     Consigned from Owner in NC. 

    Benefits

    • The Gruenberg Truck-In Oven accommodates a variety of thermal processing applications up to 1200°F
    • Ideal for powder coating, drum heating, aging, core hardening, drying, preheating, curing, and component testing
    • Additional options extend the range of applications
    • Top quality CHIL construction is energy-efficient and minimizes equipment effort
    • Heating elements designed to prevent radiant influence on the work in process

    Features

    • Heavy-duty, fully-welded structural steel frame
    • Fully welded liner
    • Removable side and back walls 
    • Moisture-proof, non-combustible, non-settling, and asbestos-free insulation
    • Energy-efficient, Incoloy sheathed, seamless tubular heaters
    • Horizontal airflow
    • 3000lb rated floor
    Purchase Price: $ 45,000.00

    Blue M LO-136-P Lab Oven TPS Ambient +10°C to +260°C
    In Stock Ships in 2-3 Days

    Blue M LO-136-P Lab Oven Serial# - E1812260

    Customer Returned Unit.  Now In Stock.  Ready to Ship!

    The Blue M Lab Oven features horizontal air flow that allows for tighter temperature uniformity. It also offers adjustable over-temperature protection to prevent damage to the oven or its load.  

    Benefits

    • Long-lasting, tube-style heating elements with superior heat ramp-up and recovery times
    • High quality design for maximum temperature uniformity
    • Efficient and environmentally friendly operation
    • Independent and adjustable over-temperature protection against load and oven damage

    Features

    • Ergonomic handles and controls
    • Stainless steel interior
    • Powder coated steel exterior
    • Tube-style heating elements
    • Extra thick insulation
    • Horizontal airflow design
    • Adjustable shelving and 2 perforated shelves for airflow
    • Premium Model and additional sizes also available

    NOTE: These lab ovens cannot be used with any volatile or hazardous materials

    Purchase Price: $3,597.00

    Click Here to see the product page.

    Tenney EVO-025 Vacuum Oven TPS Temperature: +20°C Above Ambient to +200°C
    Can ship in 3-4 Weeks

    Tenney EVO-025 Vacuum Oven Serial# - Can ship in 3-4 Weeks

    NEW!

    Tenney vacuum ovens are designed for drying, curing, outgassing, aging, process control and many other applications which require elevated temperature in reduced atmospheres. The vacuum oven includes microprocessor digital control, built-in over temperature protection as well as a door with full viewing window. 

    Benefits

    • Convenient design allows for simultaneous depressurization and heating conditioning within one machine
    • Vacuum chamber designed for efficiency and simplicity in operation
    • Reach precise altitude conditions for optimal test results with various vacuum and vent solenoid valves
    • Designed for simultaneous depressurization and heating/drying conditioning

    Features

    • Electric heaters that circumvent the structural shell of oven
    • Thermostat for over temperature protection
    • Variable capacitance type absolute pressure transducer to measure chamber pressure
    • Single-stage or two-stage oil-seated rotary vane vacuum pump included
    Purchase Price: $39,450.00
    Rental Price: $3,800.00 / month

    Baker Model SX-700 Thermal or Catalytic Oxidizer TPS Refurbished with New Equip. Warranty
    1 In Stock - ships in 3-4 Weeks

    Baker Model SX-700 Thermal or Catalytic Oxidizer Serial# - 752

    JUST IN! Refurbished Catalytic or Thermal Oxidizer.  Available for Purchase only.

    Features

    • NEMA 4, UL Classified Control Panel
    • Included Heat Exchanger and CAT Cell
    • Eclipse Model RA-0100 Burner
    • Unit is currently configured for after-burn applications, but can be reconfigured for many others.
    • Baker Refurbished unit- Includes 1-year Parts & Labor Warranty
    • Possible Rental or Rent-to-Own Options- Inquire for Details

    Purchase Price: $ 32,000.00

    Click Here to see the product page.

    50Hz Tenney C30RC2.0-A-S1.1-NY TPS 50 Hz Units
    One In Stock & Ready for Shipment

    50Hz Tenney C30RC2.0-A-S1.1-NY "C-EVO" Environmental Test Chamber Serial# - 128187

    Ready for International Shipment!  (1) 50Hz, C30RC Environmental Test Chambers.  For Purchase Only!  Can Ship in 3-5 Days!

    Since 1932, Tenney has pioneered the design and manufacturing of environmental test chambers. Designed for value, reliability, and performance, the Tenney C-EVO Temperature / Humidity Test Chamber is a world class environmental cycling test chamber loaded with standard features and advanced technological upgrades:

    • Smallest equipment footprint in the industry
    • Superior Heat Capacity (KW), Cooling Capacity (HP/BTU) and Air Flow Capacity (CFM) deliver the best temperature change rates and uniformity in the industry
    • Redundant user and equipment safety features are standard

    Benefits

    • Robust design delivers consistent, reliable, repeatable results that lead to higher productivity
    • Improved serviceability and reduced maintenance cost
    • Programmable controller - Smart 1.1TM - is very intuitive - easy to set up and user-friendly
    • Constructed for long life and thermal integrity

    Features

    • Smart 1.1™ 7" controller
    • Ethernet port
    • USB port
    • Heated viewing glass window
    • Chamber light
    • Two 3” cable ports
    • Solid state humidity sensor
    • Platinum RTD temperature sensor
    • Heavy duty leveling casters
    • Nichrome wire air heater
    • Solid state pressure switches
    • Thermal expansion valves
    • FM approved safety OTP
    • Backup safety thermal cutoff
    • Main electrical disconnect LOTO
    • Chamber vent port
    • One shelf standard
    Purchase Price: $28,937.00 each

    Click Here to see the product page.